Casambi Bluetooth Controls >PIR Sensors

DANLERS Limited have released a new range of energy saving PIR sensors configured by CASAMBI’s award winning, Bluetooth Low Energy (BLE) wireless network software. DANLERS’ Casambi enabled controls:
Automatically form a wireless mesh network.

The lighting can be controlled via the Casambi app, push buttons and switches.

Offer specifiers and installers flexible, cost effective energy saving solutions such as occupancy based control and/or light level control. Photocell settings and time out settings are fully adjustable via the Casambi app.

Eliminates the need for new wiring as all devices communicate via BLE.

Ceiling Flush (CBU – CEFL)

This Danlers PIR sensor is suitable for easy mounting through a 73/75mm diameter hole into a ceiling void which is at least 78mm deep.

Offers a detection range of 7m diameter.

Plug-in, Directional (CBU-CEDRP/CBU-CEDRPLR)

These Danlers PIR sensors can plug into a ceiling mounted socket (not included). The socket can be mounted onto an appropriate BESA box.

The CBU-CEDRP has a detection range of 10m and the CBU-CEDRPLR has a detection range of 25m.


These Danlers PIR sensors can be mounted directly onto solid ceilings or onto a range of different mounting boxes.

The CBU-HBND has a detection range of 15m x 3m, the CBU-HBSP has a detection range of 5m diameter and the CBU-HBWD has a detection range of 28m.



These Casambi enabled PIR sensors have an IP66 rated weatherproof enclosure and can be ceiling mounted. Available in narrow and wide detection.


PIR Occupancy Detector & Photocell Module for mounting directly into manufacturers own luminaires

This CBU-MOD3M module is designed for building into luminaires or it can be mounted onto a Eurodata plate.